1. Home
  2. Services
  3. Trim Carpentry

Trim & Finish Carpentry
in Upstate South Carolina

The details that make a house feel finished.

Crown molding, wainscoting, coffered ceilings, casing, mantels, interior doors and stairs, coped, mitered and fitted by hand by GRG’s own carpenters, then left ready for paint or stain.

Dining room with a painted coffered ceiling, built-up crown molding and raised-panel wainscoting, [CITY], SC
Two-story stair hall with picture-frame wall molding, painted balusters and a walnut handrail, Travelers Rest, SC
Stair hall paneling and railing, crafted as one.

Finish carpentry, by hand

Trim is what makes a room feel finished, or unfinished. Crown that meets the ceiling cleanly. Casing with crisp, even reveals. Wainscoting that lines up with the windows. We treat every joint as the one your guests will notice first.

  • Coped & mitered by hand
  • Matched to existing profiles
  • Filled, sanded & paint-ready
  • Doors, stairs & railings too

What we install

Interior Trim, Start to Finish

From a single room of crown to a whole-house trim package for a new build, every profile is chosen to suit your ceilings and rooms.

  • 01

    Crown molding

    Single-piece and built-up crown, scaled to your ceiling height and room proportions.

  • 02

    Wainscoting & paneling

    Raised, flat and board-and-batten panels, picture-frame molding and full-height wall paneling.

  • 03

    Coffered & beamed ceilings

    Grid coffers, box beams and tray details, painted or in stain-grade hardwood.

  • 04

    Baseboards

    Tall, layered baseboards that sit tight to real-world floors and walls.

  • 05

    Door & window casing

    Classic, craftsman and modern casing profiles with crisp, even reveals.

  • 06

    Fireplace mantels

    Mantels, surrounds and overmantels designed as the focal point of the room.

  • 07

    Interior doors

    Solid wood and paneled doors, hung, cased and adjusted to close just right.

  • 08

    Stairs & railings

    Wood treads, risers, skirt boards, newels and railings, fitted on site.

  • 09

    Feature walls

    Slat walls, shiplap and geometric trim that give an entry or living room a focal point.

Before & after

From Plain Drywall to a Finished Room

This Mauldin living room had bare drywall and builder-grade trim. Picture-frame wainscoting, tall baseboards, a built-up crown and new casings gave it proportion and shadow lines, and a finish that looks original to the house. Drag the slider to compare.

  • Picture-frame wainscoting
  • Built-up crown & tall baseboards
  • Wide window & door casings
After: the same Mauldin, SC room with picture-frame wainscoting, tall baseboards, crown molding and wide casings Before: an empty Mauldin, SC living room with plain drywall and builder-grade trim Before After

Living Room Wainscoting, MauldinBefore / After

Trim specialties

Restored crown molding with dentil detail above a fluted door casing with a rosette corner block, Anderson, SC

Older homes

New Trim That Looks Original

We profile your existing moldings and reproduce them, so new work blends with the original. It’s how we extend rooms, replace damaged sections and restore lost detail in older Upstate homes, without anyone being able to tell where the old ends and the new begins.

  • Existing profiles measured and reproduced
  • Repairs blended into original runs
  • Period-appropriate details for additions
White oak staircase with a walnut handrail, painted balusters and a paneled oak door on the landing, Seneca, SC

Doors, stairs & railings

The Woodwork You Touch Every Day

Doors, stairs and railings get used thousands of times a year. We hang doors to swing and latch cleanly, fit treads and risers tight, and set railings solid, then trim each one in to match the rest of the house.

  • Solid wood & paneled interior doors
  • Treads, risers & skirt boards
  • Newels, balusters & handrails
Finish carpenter cutting a coped joint into crown molding with a coping saw

The difference is in the details

What Separates Good Trim From Great Trim

  1. Coped inside corners

    Inside corners are coped, not just mitered, so they stay tight as the house moves through the seasons.

  2. Clean scarf joints

    Long runs are joined with angled scarf joints that disappear under paint.

  3. Scribed to the house

    Walls and floors are never perfectly flat. We scribe trim to the surface so it sits tight, rather than leaning on caulk to hide the gap.

  4. Paint-ready finish

    Nail holes filled, joints sanded smooth and every piece left ready for paint or stain.

Start Your Project

How it works

How a Trim Project Comes Together

Most trim projects take [X–Y] days on site. We confirm your schedule in writing before work begins.

  1. Step 01

    Walkthrough

    We walk the rooms with you, measure, and talk through profiles, scale and budget.

  2. Step 02

    Profiles

    We help you choose moldings in proportion to your rooms, or match what’s already there.

  3. Step 03

    Install

    Every piece is coped, mitered and fitted on site by our own carpenters.

  4. Step 04

    Finish

    We fill, sand and leave everything ready for paint or stain, then walk the space with you.

What our clients say

“They matched the hundred-year-old trim in our dining room so precisely that no one can tell what’s original. Every joint is perfect.”
[Client Name], Clemson [Placeholder Review]

Questions, answered

Trim Carpentry FAQs

Something else on your mind? Call (803) 546-6859 or send us a note.

Trim is priced by the room and the profile. [$X–$Y per linear foot] for crown molding and [$X–$Y per square foot] for wainscoting are typical starting points, installed. Built-up profiles, stain-grade wood and coffered ceilings cost more. We send a detailed written estimate after we measure, at no cost.

Start your trim project

Get a Free Trim Carpentry Estimate

Tell us which rooms you have in mind. We’ll schedule a visit to measure and talk through profiles, then send a detailed written estimate at no cost.

We reply within one business day.

Three crafts. One standard.

Cabinets, trim and built-ins from one team means every room shares the same profiles, finishes and level of detail.

Call Get a Free Estimate